Specifications of the PAM-2500 - Accessories

Mobile Demand xTablet T8540 UMPC-7

Rugged tablet PC, PamWin software installed. Operating system Windows 10. Actual hardware specifications will be provided ahead of order or on request.

Leaf-Clip Holder 2030-B

Mini quantum sensor: Magnetically attached, swivel-mounted sensor (see LS-C sensor), selective PAR measurement, 0 to 20000 μmol m-2 s-1 PAR

Thermocouple: Ni-CrNi, diameter 0.1 mm, -20 to +60 °C

Output: PAR, high sensitivity range: 0 to 1000 μmol m-2 s-1; normal sensitivity range: 0 to 20000 μmol m-2 s-1 (output 0 to 2.5 V for each range). Leaf temperature, -20 to +60 °C (0 to 0.8 V). Remote trigger button, signal line connected to ground

Power supply: PAM-2500 leaf clip socket (5 V/4 mA)

Cable length: 100 cm

Dimensions: 17 cm x 5.7 cm (max.) x 8 cm (max.) (L x W x H)

Weight: 310 g

Fiberoptics Holder for Surfaces 2060-A

Aluminum plate (6.0 x 3.3 cm max.) with 11 mm diameter circular hole (measuring area) and aluminum port to position fiber at an angle of 60° relative to the aluminum plate. With port for temperature sensor of 2060-M unit to measure surface temperature and thread to mount the PAR sensor of the 2060-M unit. Connected to a 10 x 0.8 cm (L x Ø) steal rod with two lateral plastic supports (12 cm x 1 cm x 1 cm, L x W x H) which are lockable by knurled screws

Dimensions (without plastic supports): 15 cm x 3.3 cm x 2.5 cm (L x W x H)

Weight: 125 g

2035-B/RLC Conversion Kit for 2030-B/2035-B Leaf Clips

Design: Duct and mounting bar, made of Plexiglas, replacing the standard 60° fiberoptics duct of the 2030-B clip (PAM-2500) or the 2035-B clip (MINI-PAM-II). The duct positions the fiberoptics 2010-F (2030-B clip) or fiberoptics MINI-PAM/F (2035-B clip) perpendicularly to the sample surface. With lateral set screw. Including two circular light-shielding elements made from cellular rubber and a 3 cm x 2 cm (L x W) black plastic base plate with cellular rubber rim.

Dimensions, max: 7 cm x 2.6 cm x 2.7 cm (L x W x H)

Weight: 12 g

Arabidopsis Leaf Clip 2060-B

Design: Aluminum clip with 3.2 mm diameter viewing area designed to position small leaves below the fiberoptics of the PAM-2500, prepared to accommodate PAR and temperature sensors of the Mini Quantum/Temperature-Sensor 2060-M

Dimensions: 7.6 cm x 3.0 cm (max.) x 5.2 cm (max.) (L x W x H)

Weight: 55 g

Dark Leaf Clip DLC-8

Design: Clip made of aluminum with felt contact areas and sliding shutter

Dimensions: 6.5 cm x 2 cm (max.) x 1.5 cm (max.) (L x W x H)

Weight: 3.6 g

Mini Quantum/Temperature-Sensor 2060-M

Mini quantum sensor: LS-C sensor, selective PAR measurement, 0 to 20000 μmol m-2 s-1 PAR

Thermocouple: Ni-CrNi, 0.1 mm diameter,
-20 to +60 °C

Output: PAR, high sensitivity range: 0 to 1000 µmol/(m2·s); normal sensitivity range: 0 to 20000 μmol m-2 s-1 PAR (output 0 to 2.5 V for each range). Leaf temperature, -20 to +60 °C (0 to 0.8 V)

Power supply: PAM-2500 leaf clip socket (5 V/4 mA)

Length of power cable: 100 cm

Length of sensor cables: 30 cm

Dimensions: 16 cm x 3 cm x 1.7 cm (L x W x H)

Weight: 220 g

Suspension Cuvette KS-2500 and Stirrer MKS-2500

Cuvette: Round stainless steel cuvette (7.5 mm wide, 9.0 mm deep) with top window adapter for connecting the Fiberoptics; embedded in PVC body with injection port for Hamilton syringes and hose nozzles for connecting an external flow-through water bath (not included). Including three 6.0 x 1.5 mm magnetic stir bars

Magnetic stirrer: To drive the magnetic flea in the Suspension Cuvette KS-2500; with PVC ring for centering the cuvette and miniature stand to fix the fiberoptics on top of the cuvette

Arabidopsis Leaf Holder DUAL-BA

Design: Tube-shaped fiber tip holder composed of polyoxymethylene (POM; 4.5 cm x 2.5 cm, L x D max,) with recessed permanent neodymium magnet. Spring steel band (0.3 mm thick, 1.5 cm wide) consisting of two arms (2 cm and 5 cm, respectively) which form a right angle. The leaf is positioned between the 2 cm arm and the fiber optics tip. The 5 cm arm is attached to the fiber tip holder by the magnet. The 5 cm arm runs in a slit guide. Including a stand with fiberoptics guide

Compact Tripod ST-2101A

Height: Adjustable between 24 cm and 87 cm

Weight: 400 g

Automatic Charger 000190101099

Description: Charger for external battery 000160101314, input 100-230 V, 50-60 Hz AC, 0.4 kg

Battery Cable MINI-PAM/AK

Design: External DC cable to connect 12 V battery. One red and one black (GND) blade receptacle at one end, the other end with special PAM-2500 EXT. DC plug.

Length: 85 cm

Weight: 45 g

External Battery 000160101314

Battery: 12 V battery, 2.1 Ah, 0.84 kg

Dimensions: 3.4 cm x 17.8 cm x 6.0 cm. Charge cycle, 2 hours